TIRFOR® Hoists & Rope
|The TU and T-500 series of TIRFOR® lifting and pulling machines are safe, reliable and efficient. Suitable for many applications. TIRFOR® machines are lever operated hoists using a separate wire rope. One-man operated, using a telescopic handle, they work in any position and over any height of lift. They can replace conventional winches and other hoists for many applications.|
|Positioning of steel
structures and frames
|Moving and installation
|T 500 Series (light duty)||TU Series (heavy duty)||Wire Rope||Snatch Blocks||TIRVIT Wire Rope Tensioner|
T 500 Series
Light and compact, the TIRFOR® T-500 machines are easy to handle,
provide a high mechanical advantage and are economical.
TIRFOR® TU machines are in daily operation on construction sites around the world putting power where it is needed for lifting, pulling and handling a wide variety of loads.
Only the TU models are UL classified for manriding. Please refer to your local safety regulations.
Special manufactured 4-strand wire rope provides the required stability to properly function with TIRFOR® machines. Each wire rope comes with a welded and pointed end. End attachments (hooks, links, shackles etc.) are attached according to your request. Wooden reels are provided for length above 80 ft at no extra charge (wire spool shown not included in price).
|For Model|| Wire Rope
|If Hook is
Increase the capacity of your TIRFOR® hoist by reeving the rope through sheave blocks. Capacities shown are the total permissible load onto the block fitting.
Bronze bushed, painted blue.
|For Model||Wire Rope
TIRVIT Wire Rope Tensioner
For pulling and tensioning applications. Tensions wire rope to span between posts and finish with clips. TIRVIT® attaches at any point onto the wire rope. The lever action is similar to that of a TIRFOR® hoist plus you can take it off the rope without having the entire rope length fed through it. This is a neat little gizmo – most riggers don’t even know it exists. Stops the hassle of getting a rope tight between posts.
|Model|| For Wire Rope
|F2 STD||3/32 – 5/16||900|
|F3 STD||5/16 – 9/16||1300|
|F4 STD||9/16 – 11/16||1750|
Magna Wire Rope Pullers
- ISO 9001 and TUV-CE Certified factory
- Tested to 150% of rated load
- Rugged construction for heavy duty work
- Compact and light for easy use and operation
- Excellent for precise positioning
- Used for any height of lift or length of pull
- Can be operated in any position and direction
- Extra shear pins come with unit
- Made in China
|Model No.||Lifting Capacity (lbs)||Rope advance per full stroke
|Standard wire rope length
|Net Weight w/ Handle
|Pulling effort at rated capacity
|WRP075C||1,760||2||5/16||33 & 65||20||32.5||64|
|WRP150C||3,525||2.2||7/16||33 & 65||36||47.5||93|
|WRP300C||7,050||1.1||5/8||33 & 65||58||47.5||99|