Model IPU10/S
 
 
 

For stainless steel and very hard materials (Hardox)

IP10/S – IPU10/S vertical lifting clmaps:
Suitable for the lifting, turning (180°) and transfer in vertical position of stainless steel plates, beams and sections. These lifting clamps are fitted with a camsegment and a pivot made of stainless steel so as to avoid contact corrosion.

Available in two version:

  1. IPU10/S: fitted with a hinged hoisting eye moving in all directions so as to enable the user to place and lift the load from any direction. Further specifications: see model IPU10. To avoid overloading your clamp please consult fig. 1 & 2.
  2. IP10/S: fitted with a fixed hoisting eye. Further specifications: see model IP10. To avoid overloading your clamp please consult fig. 3 & 4.

IP10/H – IPU10/H vertical lifting clmaps:

Suitable for the lifting, turning (180°) and vertical transfer of steel plates and sections with extra hard surface hardness. The lifting clamp is suitable for the lifting of materials with a surface hardness up to max. 47 Rc (450 HB). thes liftings clamps are fitted with a pivot and a camsegment made of extra hard wear-resistant material.

Available in two version:

  1. IPU10/H: fitted with a hinged hoisting eye moving in all directions. Further specifications: see model IPU10. To avoid overloading your clamp please consult fig. 1 & 2.
  2. IP10/H: fitted with a fixed hoisting eye. Further specifications: see model IP10. To avoid overloading your clamp please consult fig 3 & 4.

 
Spare parts for IPU10 lifting clamps: Order No.
1. body complete  
2. universal hoisting eye complete 1235
3. camsegment complete 1234
4. latch complete 1233
5. spring for latch complete 1063
6. camsegment shaft complete 1046
7. hoisting eye shaft complete 1047
10. pivot complete (round) 0098
10. pivot complete (oval) 0099
Before using the clamp always read the Operator’s supplied with the clamp.
Model Order
No.
WLL
per pce
in t
Weight
per pce
lbs
For stainless steel with universal hoisting eye
0,5-IPU10/S 2275 0.5 4.2
1-IPU10/S 2263 1.0 4.6
2-IPU10/S 2277 2.0 16.8
3-IPU10/S 2265 3.0 32.6
4,5-IPU10/S 2267 4.5 35.3
0,5-IP10/S 2274 0.5 4.0
1-IP10/S 2262 1.0 4.4
2-IP10/S 2276 2.0 15.0
3-IP10/S 2264 3.0 30.4
4,5-IP10/S 2266 4.5 33.0
0,5-IPU10/H 2175 0.5 4.2
1-IPU10/H 2177 1.0 16.8
2-IPU10/H 2165 2.0 32.6
3-IPU10/H 2167 3.0 35.3
0,5-IP10/H 2174 0.5 4.0
1-IP10/H 2176 1.0 15.0
2-IP10/H 2164 2.0 30.4
3-IP10/H 2166 3.0 33.0
     
        Fig. 3   Fig. 4

Model Order
No.
WLL per pce
in t
Jaw
A
Dimensions In Inches Weight per
pce lbs
B C D E F G H J K
0,5-IPU10/S 2275 0.5 0-5/8 1 47/64 5 3/64 8 31/32 1 3/16 4 17/32 1 39/64 1 7/64 25/64 4.2
1-IPU10/S 2263 1.0 0-3/4 1 3/4 5 15/32 8 3/4 1 3/16 4 15/32 1 5/8 1 1/2 25/64 4.6
2-IPU10/S 2277 2.0 0-1 3/8 3 5/64 7 29/32 14 41/64 2 3/4 7 15/32 2 13/32 2 11/64 5/8 16.8
3-IPU10/S 2265 3.0 0-1 5/8 3 15/16 9 61/64 17 33/64 2 61/64 8 55/64 3 5/64 2 23/64 25/32 32.6
4,5-IPU10/S 2267 4.5 0-1 5/8 3 15/16 9 61/64 17 33/64 2 61/64 8 55/64 3 15/64 2 9/16 25/32 35.3
0,5-IP10/S 2274 0.5 0-5/8 1 47/64 5 3/64 8 5/32 1 3/16 4 17/32 1 39/64 1 7/64 25/64 4.0
1-IP10/S 2262 1.0 0-3/4 1 3/4 5 15/32 8 15/32 1 3/16 4 15/32 1 5/8 1 1/2 25/64 4.4
2-IP10/S 2276 2.0 0-1 3/8 3 5/64 7 29/32 13 15/64 2 3/4 7 15/32 2 13/32 2 11/64 5/8 15.0
3-IP10/S 2264 3.0 0-1 5/8 3 15/16 9 61/64 17 11/64 2 61/64 8 55/64 3 5/64 2 23/64 25/32 30.4
4,5-IP10/S 2266 4.5 0-1 5/8 3 15/16 9 61/64 17 11/64 2 61/64 8 55/64 3 15/64 2 9/16 25/32 33.0
0,5-IPU10/H 2175 0.5 0-5/8 1 47/64 5 3/64 8 31/32 1 3/16 4 17/32 1 39/64 1 7/64 25/64 4.2
1-IPU10/H 2177 1.0 0-1 3/8 3 5/64 7 29/32 14 41/64 2 3/4 7 15/32 2 13/32 2 11/64 5/8 16.8
2-IPU10/H 2165 2.0 0-1 5/8 3 15/16 9 61/64 17 33/64 2 61/64 8 55/64 3 5/64 2 23/64 25/32 32.6
3-IPU10/H 2167 3.0 0-1 5/8 3 15/16 9 61/64 17 33/64 2 61/64 8 55/64 3 15/64 2 9/16 25/32 35.3
0,5-IP10/H 2174 0.5 0-5/8 1 47/64 5 3/64 8 5/32 1 3/16 4 17/32 1 39/64 1 7/64 25/64 4.0
1-IP10/H 2176 1.0 0-1 3/8 3 5/64 7 29/32 13 15/64 2 3/4 7 15/32 2 13/32 2 11/64 5/8 15.0
2-IP10/H 2164 2.0 0-1 5/8 3 15/16 9 61/64 17 11/64 2 61/64 8 55/64 3 5/64 2 23/64 25/32 30.4
3-IP10/H 2166 3.0 0-1 5/8 3 15/16 9 61/64 17 11/64 2 61/64 8 55/64 3 15/64 2 9/16 25/32 33.0