DESCRIPTION

With integral display, used in many testing and load monitoring applications worldwide.

All Loadblok Plus loadcells have push button control for:

  • Tare, units (kg, lbs, kN & ton)
  • Peak hold
  • Pre set tare
  • Audible setpoint alarm
  • Overload counter
  • Offset adjustment

Remote output port is fitted as standard, this will allow connection to Straightpoint’s™ range of accessories.

All LOADBLOCK Plus are fitted with an adjustable setpoint audible alarm as standard and supplied with a calibration and proof test certificate.

The Loadblock plus is a low capacity, self-indicating compression load cell, used in many testing and load monitoring applications worldwide.

The integral display eliminates the need for a separate display or cable assembly that can be easily damaged. Applications include the measurement of loads associated with the testing of hydraulic presses, cylinders or jacks.

This latest version of Straightpoint’s Loadblock has advanced features and benefits providing solutions for today’s complicated load test and force monitoring needs. Features include full function push button controls for tare, units of measure (lbs, kg, kN, and tonnes), peak hold, pre-set tare, audible set-point alarm and an overload counter.

This crucial overload alarm counter is a requirement for many safety and quality control departments, as it keeps track of overload events, allowing the load cell in question to be removed from service immediately, following a calibration voiding overload event. The load cell in question can then be sent out for proper testing and, if necessary, recalibration before re-entering service.

The advanced microprocessor based electronics provide the Loadblock plus with high speed read rates (500/sec), extreme resistance to industrial level noise and unprecedented stability.

This high stability provides the Loadblock plus with 5,000 + divisions and the highest standard resolution of any self-indicating compression load cell on the market today.

The unit also features a RS-485 serial output port allowing for remote viewing with either the Handheld plus digital display/controller or Windows PC desktop controller data logging software.

Features and Benefits:

  • Large 25mm/1” LCD Display
  • High resolution
  • 100Hz Peak hold
  • Compact size
  • Push button tare
  • Preset tare
  • RS485 port for connection to datalogging system
  • Selectable units te, lbs, kN & kg
 
 

 

SPECIFICATIONS

Part Number LBP250KGU LBP500KGU LBP1TU LBP2TU LBP5TU
Capacity 550 lb 1,100 lb 2,200 lb 4,400 lb 11,000 lb
Resolution 0.2 lb 0.5 lb 1 lb 2 lb 2 lb
Units lbs, te, kN & kg
Weight 2 lb 2 lb 2 lb 3.3 lb 6.8 lb
Safety Factor 4:1 5:1 5:1 5:1 5:1
Protection
NEMA 4X
Battery Type
9v PP3
Battery Life
80 hours continuous
Display Type
6 digit 1″ LCD
Operating Temp
14 to 122°F
Accuracy
+/- 0.3% of applied load
Dimension A 3.19 3.19 3.19 3.62 3.62
Dimension B 3.19 3.19 3.19 4.61 5.35
Dimension C 4.45 4.45 4.45 4.41 4.41
Dimension D 3.54 3.54 3.54 4.09 4.53
Dimension E 4.09 4.09 4.09
Part Number LBP250KG LBP500KG LBP1T LBP2T LBP5T
Capacity 250 kg 500 kg 1 te 2 te 5 te
Resolution 0.1 kg 0.2 kg 0.0005 te 0.001 te 0.001 te
Units t, kg, kN & lbs
Weight 900 g 900 g 900 g 1.5 kg 3.1 kg
Safety Factor 4:1 5:1 5:1 5:1 5:1
Protection
IP65
Battery Type
9v PP3
Battery Life
80 hours continuous
Display Type
6 digit 25mm LCD
Operating Temp
-10 to +50 °C
Accuracy
+/- 0.3% of applied load
Dimension A 81 81 81 92 92
Dimension B 81 81 81 117 136
Dimension C 113 113 113 112 112
Dimension D 90 90 90 104 115
Dimension E 104 104 104
 
 

 

ACCESSORIES

 

Handheld Plus

Desktop Controller Datalogging Software Package

 
 

 

APPLICATIONS

  • Pre-lift weight and centre of gravity calculations for large plant and equipment.
  • Hydraulic ram testing