The full swivel and pivot action of the Jergens Hoist Ring allows you to flip and turn parts without unhooking. Plus, the extra-large diameter rings let you use almost any size hook.

  • Rated at 5:1 Strength Factor
  • Material: Alloy Steel
  • Clevis, Ring, Bushing and Cap Screw are magnetic particle inspected
  • Clevis is x-rayed
  • Finish: Black Oxide
  • Bushing: Zinc Plated with conversion coating, yellow (inch), clear blue (metric)
  • Proof Tested to 200% of Rated Load Capacity
  • Available with Envirolox™ protective finish

Part
Number
Thread Load
Capacity*
B C D E F G Torque** Replacement
Bolts
47311 5/16-18 650 2 2 1/8 2 1 1/2 5/8 3/8 3.5 47341
47312 3/8-16 800 2 2 3/8 2 1 1/2 3/4 3/8 4.5 47342
47313 1/2-13 1800 3 3 3/8 3 3/16 2 3/8 1 5/8 15 47343
47314 5/8-11 2500 3 3 5/8 3 3/16 2 3/8 1 1/4 5/8 25 47344
47315 3/4-10 4100 4 5 5 3 3/4 1 1/2 1 50 47345
47316 1-8 7100 4 5 3/8 5 3 3/4 2 1 90 47346
47317 1 1/4-7 14000 6 6 7/8 6 13/16 4 5/8 2 1 3/8 150 47347
47317-08 1 1/4-8 14000 6 6 7/8 6 13/16 4 5/8 2 1 3/8 150
47318 1 1/2-6 17200 6 7 7/8 6 13/16 4 5/8 2 1/2 1 3/8 250 47348
47318-08 1 1/2-8 17200 6 7 7/8 6 13/16 4 5/8 2 1/2 1 3/8 250
47319 2-4 1/2 29000 5 1/4×10 1/2 10 6 13/16 4 5/8 3 1/8 1 1/2 300 47349
47319-08 2-8 29000 5 1/4×10 1/2 10 6 13/16 4 5/8 3 1/8 1 1/2 300

Part
Number
Thread Load
Capacity*
B C D E F G Torque** Replacement
Bolts
47351 M 8×1.25 325 50.8 61 50.8 38.1 16 9.5 0.43 47391
47352 M 10×1.50 500 50.8 63 50.8 38.1 20 9.5 0.6 47392
47353 M 12×1.75 725 76.2 85 81 60.3 24 15.9 2 47393
47354 M 16×2.0 1400 76.2 94 81 60.3 31 15.9 3.5 47394
47355 M 20×2.5 2290 101.6 133 125.4 95.3 40 25.4 7 47395
47356 M 24×3.0 3050 101.6 147 125.4 95.3 47 25.4 12.5 47396
47357 M 30×3.5 4850 152.0 173.8 173.0 117.5 43.6 31.7 34.6 47397
47358 M 36×4.0 7500 152.0 191.0 173.0 117.5 67.5 35.0 55.0

* Stated load capacity based on specific thread torques as shown in chart.
** It is recommended that these torques be used when installing hoist rings.