These blocks are designed for high cycle lifting applications using two- or more Twin-Path® slings. The block design avoids that slings are either crunched or bunched into a single hook, or placed on top of each other into too small sister hooks. Main applications are in automotive stamping plants where the slings remain rigged to the hook/block as ‘Standard Slings’. These slings will only be taken off the hook/block for maintenance or sling inspection.

Two different styles are available:

Rectangular design (60˚ between slings)
Rectangular design (60° between slings) for rectangular shaped loads or dies.
Square design (90˚ between slings)
Square design (90° between slings) for square shaped loads or dies.
All pins are bolt style with lock nut and cotter pins. Edges are well rounded to ensure that Twin-Path® slings do not get damaged. WavePin™ design avoids that the sling slides to either side

All blocks are shaped from a solid piece of 4140 Alloy steel. No welds which need inspection during service.

Blocks are custom manufactured from pre-engineered designs. WLL’s generally range between 30 tons and 200 tons. Design Factor is 4:1

4-sling lift 2-sling lift Single point lift