Twin-Path® TPXC K-Spec yarns
Single Leg Slings with green Covermax cover

DF 5:1

Sling directly fabricated into
RIGGER’S CHOICE® Master Links

The minimum end-fitting capacity must be equal or higher than the VERTICAL (90°) single leg capacity. See in table on right.

The variety of end fitting choice is astronomical, so please select Rigger’s Choice®, Crosby®, Green Pin® or any other Hardware as end fitting.

When selecting hardware remember that a DF 5:1 is required, means any Alloy Lifting CHAIN hardware WLL has to be converted from a DF of 4:1 to 5:1.

Note that we only recommend to fabricate single legs with master links.

Picture shows sling with optional Fiber Optic Inspection Tail and standard Check-Fast® System.

RIGGER’S CHOICE® Hardware
These fittings are attached the same as grade 80 chain fittings. Tools are required to connect and disconnect the fittings. This is regarded as a more permanent connection.

Twin-Path® Extra Single Leg Slings K-SPEC® Core Yarns
WLL lbs 90° Nom. Master Link diameter inch Min. Sling Length w/o hardware
TPXC 2000-S1-10 1-leg 20,000 1 3
TPXC 2500-S1-10 1-leg 25,000 1-1/4 3
TPXC 3000-S1-10 1-leg 30,000 1-1/4 3
TPXC 4000-S1-10 1-leg 40,000 1-1/2 4
TPXC 5000-S1-10 1-leg 50,000 1-1/2 4
TPXC 6000-S1-10 1-leg 60,000 1-3/4 4
TPXC 7000-S1-10 1-leg 70,000 1-3/4 6
TPXC 8500-S1-10 1-leg 85,000 1-3/4 6
TPXC 10000-S1-10 1-leg 100,000 2 6
TPXC 12500-S1-10 1-leg 125,000 2-1/4 6
TPXC 15000-S1-10 1-leg 150,000 2-1/2 8
TPXC 17500-S1-10 1-leg 175,000 3 8
TPXC 20000-S1-10 1-leg 200,000 3 8
TPXC 25000-S1-10 1-leg 250,000 3-1/2 8
TPXC 27500-S1-10 1-leg 275,000 3-1/2 8