Eye Plate-threaded VRBG-16

Description

The special relief lugs protect the securing bolt against bending and shearing loads. This provides additional safety.

Stowable with smaller bolts and thus low profile.

A favourable distribution of the introduced forces.

A forged ring according to EN 1677-1, quality grade 80, 100% electromagnetic crack detected and coloured red.

It is in compliance with the approval requirements of the respective employers' liability insurance association (BG).

Only the provided crack detected hexagon socket bolts according to DIN 912 should be used. Make sure the bolting surface is plain.

Scribing and drilling according to the tolerance range of VRBG.

Work piece material, at least 1.0037 (St 37).

For light metals, non-ferrous heavy metals, and grey cast iron, the thread type allocation must be done in such a way that the WLL of the thread type fulfills the requirements of the respective work piece.

Tighten up the bolts with a torque of 600 nm.

When impact loaded or operated in environments with vibrations, unintentional loosening can happen.

Securing possibilities: use of a liquid thread securing medium, e.g. Loctite (follow the manufacturer's recommendations), or positive bolt securing, for example, using a castellated nut with a split pin, a counter nut, etc.

After being used over a longer period of time, inspect the bolts to make sure they are still tight.

thumb Product Information Sheet (PDF)