Popular sized hoist rings (1/2-13 through 1-8) are offered with two or more length bolts. Use the longer lengths with softer parent materials, the shorter lengths with hard materials such as steel. Hoist Ring Installation Information and Quality Standards

  • Full 360° Swivel and 180° Pivot Action
  • Rated at 5:1 Strength Factor
  • Material: Alloy Steel
  • Finish: Nickel based Envirolox coating
  • U-Bar, Bolt, Pins, Base, Washer and Bushing are magnetic particle inspected
  • Proof Tested to 200% of Rated Load Capacity
  

The Envirolox™ Protective Finish
The Envirolox Protective Finish is a proprietary nickle based coating that helps to prevent rusting and other environmental hazards from affecting the Jergens Hoist Rings. This gold-colored coating does not contain cadmium or chromium, is environmentally friendly, and is proven to be effective in extreme conditions. It provides suface hardness, lubricity and more effective corrosion protection than paints. Envirolox Protective Finish is available on Jergens Center-Pull Style Hoist Rings and Side-Pull Style Hoist Rings.

  • Please Note: It is not recommended for the Swivel Eyebolt or the SP 2000 products.
Part
Number 		Thread
Size
A		 Load
Capacity
(lbs)		 C
Length 		B D E F G H Torque Bolts
23304 1/4-20 550 1/2 2.67 0.75 0.43 .38 1.84 1 5/16 5 23604-E
23305 5/16-18 800 1/4 2.67 0.75 0.43 .38 1.84 1 1/4 7 23605-E
23306 5/16-18 800 9/16 2.67 0.75 0.43 .38 1.84 1 1/4 7 23606-E
23308 3/8-16 1000 9/16 2.67 0.75 0.43 .38 1.84 1 1/4 12 23608-E
23310 1/2-13 2500 1 1/16 3.75 1.2 0.69 .50 2.56 2 3/8 28 23610-E
23311 1/2-13 2500 3/4 4.78 1.5 0.88 .75 3.52 2 3/8 28 23611-E
23312 1/2-13 2500 1 4.78 1.5 0.88 .75 3.52 2 3/8 28 23612-E
23313 1/2-13 2500 1 1/4 4.78 1.5 0.88 .75 3.52 2 3/8 28 23613-E
23314 5/8-11 4000 1 4.78 1.5 0.88 .75 3.52 2 1/4 60 23614-E
23315 5/8-11 4000 1 1/4 4.78 1.5 0.88 .75 3.52 2 1/4 60 23615-E
23317 3/4-10 5000 1 4.78 1.5 0.88 .75 3.52 2 1/8 100 23617-E
23318 3/4-10 5000 1 1/2 4.78 1.5 0.88 .75 3.52 2 1/8 100 23618-E
23320 3/4-10 7000 1 6.52 2.31 1.4 1.00 5.14 2 15/16 100 23620-E
23321 3/4-10 7000 1 1/2 6.52 2.31 1.4 1.00 5.14 2 15/16 100 23621-E
23323 7/8-9 8000 1 6.52 2.31 1.4 1.00 5.14 2 13/16 160 23623-E
23324 7/8-9 8000 1 1/4 6.52 2.31 1.4 1.00 5.14 2 13/16 160 23624-E
23325 1-8 10000 1 1/4 6.52 2.31 1.4 1.00 5.14 2 11/16 230 23625-E
23326 1-8 10000 1 1/2 6.52 2.31 1.4 1.00 5.14 2 11/16 230 23626-E
23327 1-8 10000 2 1/4 6.52 2.31 1.4 1.00 5.14 2 11/16 230 23627-E
23329 1 1/4-7 15000 1 7/8 8.73 3.19 1.75 1.25 6.5 4 1/4 470 23629-E
23333 1 1/2-6 24000 2 3/4 12.47 4.19 1.75 1.75 8.55 6 1/2 800 23633-E
23335 2-4 1/2 30000 3 1/8 12.47 4.19 2.25 1.75 8.55 6 1/8 800 23635-E
23338 2 1/2-4 50000 4 16.50 5.75 3 2.25 11.72 8.5 2100 23638-E
Part
Number 		Thread
Size
A		 Load
Capacity
(kg)		 C
Length 		B D E F G H Torque Bolts
23355 M6x1.0 200 13.5 67.8 19 10.9 9.7 46.7 34 .6 23655-E
23356 M8x1.25 400 12.5 67.8 19 10.9 9.7 46.7 32 1 23656-E
23358 M10x1.50 450 17.5 67.8 19 10.9 9.7 46.7 30 1.7 23658-E
23362 M12x1.75 1050 19.0 123.0 38.1 22.4 19.0 89.4 60.5 3.8 23662-E
23365 M16x2.0 1900 29.0 123.0 38.1 22.4 19.0 89.4 56.5 8.2 23665-E
23368 M20x2.5 2150 34.0 123.0 38.1 22.4 19.0 89.4 52.5 13.6 23668-E
23371 M20x2.5 3000 32.0 163.0 58.7 35.6 25.4 130.6 73 13.6 23671-E
23374 M24x3.0 4200 37.0 163.0 58.7 35.6 25.4 130.6 69 31 23674-E
23378 M30x3.5 7000 46.0 221.7 81 44.5 31.7 165.1 107.4 60 23678-E
23379 M30x3.5 7000 66.0 221.7 81 44.5 31.7 165.1 107.4 60 23679-E
23383 M36x4.0 11000 68.0 316.7 106.4 57.2 44.4 217.2 166.5 100 23683-E
23384 M42x4.5 12500 68.0 316.7 106.4 57.2 44.4 217.2 160.5 100 23684-E
23385 M48x5.0 13500 88.0 316.7 106.4 57.2 44.4 217.2 154.5 100 23685-E
23388 M64x6.0 22500 96.0 419.1 146 76.2 57.15 297.6 210 290 23688-E