Universal – For lifting in any direction

The type IPU10 vertical lifting clamp is used for lifting, turning (180°) and vertical transfer of steel plates and constructions. The hinged hoisting eye allows the user to place and lift the load from virtually any direction. All IPU10 clamps are built with a latch that locks in both the open and closed positions. this allows the operator to easily position the clamp, close the latch and move away from the load before the lift begins. IPU10 clamps with working load limits of 12 tons and up have special hook-up devices built in to assist in the placement of these large-sized clamps.

To avoid overloading your clamp, please refer to figures 1 and 2. Higher working load limits and different jaw apertures are available upon request. the new basic type IPU10 is an innovation based on the familiar ‘IPUZ’ lifting clamps. The new models have a larger jaw opening, which makes it possible to lift plates with very different thickness by using one the same clamp. For special applications see also pages IP10, IP(U)10/S IP(U)10/H, IPNM, and Custom-Designed Clamps.

 
Spare parts for IPU10 lifting clamps: Order No.
1. body complete  
2. universal hoisting eye complete 1235
3. camsegment complete 1234
4. latch complete 1233
5. spring for latch complete 1063
6. camsegment shaft complete 1046
7. hoisting eye shaft complete 1047
10. pivot complete (round) 0098
10. pivot complete (oval) 0099

Before using the clamp always read the Operator’s manual supplied with the clamp.

 
Model Order
No. 		WLL
per pce
in t		 Weight
per pce
lbs
0,5-IPU10 1675 0.5 4.2
1-IPU10 1663 1.0 4.6
2-IPU10 1677 2.0 16.8
3-IPU10 1665 3.0 32.6
4,5-IPU10 1667 4.5 35.3
6-IPU10 1669 6.0 52.9
9-IPU10 1671 9.0 65.0
9-IPU10/J 1673 9.0 67.2
12-IPU10 1679 12.0 125.7
12-IPU10/J 1681 12.0 130.0
16-IPU10 1683 16.0 174.0
16-IPU10/J 1685 16.0 203.0
22,5-IPU10 1687 22.5 281.0
22,5-IPU10/J 1689 22.5 288.0
30-IPU10 1691 30.0 337.0
30-IPU10/J 1693 30.0 364.0
     
        Fig. 1   Fig. 2
Model Order
No.		 WLL per pce in t Jaw
A		 Dimensions in Inches Weight per
pce lbs
B C D E F G H J K
0,5-IPU10 1675 0.5 0-5/8 1 47/64 5 3/64 8 31/32 1 3/16 4 17/32 1 39/64 1 7/64 – 25/64 4.2
1-IPU10 1663 1.0 0-3/4 1 3/4 5 15/32 8 3/4 1 3/16 4 15/32 1 5/8 1 1/2 – 25/64 4.6
2-IPU10 1677 2.0 0-1 3/8 3 5/64 7 29/32 14 41/64 2 3/4 7 15/32 2 13/32 2 11/64 – 5/8 16.8
3-IPU10 1665 3.0 0-1 5/8 3 15/16 9 61/64 17 33/64 2 61/64 8 55/64 3 5/64 2 23/64 – 25/32 32.6
4,5-IPU10 1667 4.5 0-1 5/8 3 15/16 9 61/64 17 33/64 2 61/64 8 55/64 3 15/64 2 9/16 – 25/32 35.3
6-IPU10 1669 6.0 0-2 4 61/64 11 57/64 20 43/64 3 5/32 11 1/2 3 5/16 3 47/64 1 47/64 25/32 52.9
9-IPU10 1671 9.0 0-2 4 61/64 12 51/64 21 59/64 3 5/32 12 13/64 3 5/8 4 9/64 1 47/64 25/32 65.0
9-IPU10/J 1673 9.0 2-3 7/8 4 57/64 12 51/64 22 1/8 3 5/32 14 11/64 3 5/8 4 9/64 1 47/64 25/32 67.2
12-IPU10 1679 12.0 0-2 1/8 6 51/64 15 25/64 24 17/32 3 5/32 13 1/32 4 39/64 5 25/64 1 39/64 1 125.7
12-IPU10/J 1681 12.0 2 1/8-4 1/4 7 51/64 17 9/32 26 1/2 3 5/32 16 11/32 4 69/64 5 25/64 1 39/64 1 130.0
16-IPU10 1683 16.0 1/4-2 1/2 7 25/64 18 5/16 28 57/64 3 15/32 15 5/8 4 11/16 6 1/32 1 49/64 1 174.0
16-IPU10/J 1685 16.0 2 1/2-5 8 9/32 20 33/64 31 7/64 3 15/32 18 37/64 4 11/16 6 11/32 1 49/64 1 203.0
22,5-IPU10 1687 22.5 1/4-3 1/8 8 5/16 21 13/16 33 21/32 4 21/64 18 1/2 5 23/64 7 21/64 1 59/64 1 281.0
22,5-IPU10/J 1689 22.5 3 1/8-6 1/8 9 61/64 24 23/32 36 39/64 4 21/64 22 41/64 5 23/64 7 23/32 1 59/64 1 288.0
30-IPU10 1691 30.0 1/4-3 1/8 8 47/64 21 29/64 33 55/64 4 21/64 18 1/2 5 63/64 7 21/64 2 1/8 1 3/16 337.0
30-IPU10/J 1693 30.0 3 1/8-6 1/8 9 27/32 24 13/32 36 13/16 4 21/64 22 1/2 5 63/64 7 23/32 2 1/8 1 3/16 364.0