The CornerMax™ Sleeve is the latest in rigging protection from SLINGMAX® Rigging Solutions. The CornerMax™ Sleeve is the ideal solution to protect synthetic slings from cutting when it is not practical to use a CornerMax™ Pad (due to curvature of the load edge). Independent field and laboratory testing has shown the CornerMax™ Sleeve to be extremely cut resistant. The CornerMax™ Sleeve is made from Dyneema® Fiber. To prevent sliding, the 6˝ wide CornerMax™ Sleeve has been sewn down the middle (5˝) on each end of the Twin-Path® Extra Sling (pictured). The true benefits of this revolutionary material far outweigh the costs and now provide for the use of synthetic slings in applications previously dominated by heavy chain, mesh and wire rope slings.
Maximum loading is 25,000 lbs per sling inch of sling width.

Advantages at a glance:

  • Twin-Path® with CornerMax™ sleeve is 10 x lighter than conventional Gripper Mesh Slings.
  • Chain and Gripper Mesh slings require the rigger to use a “fish hook” to grab and pull the sling through the coil. Twin-Path™ with CornerMax™ Sleeve is so light one underhanded toss is all you need to pass though the coil center.
  • Will not damage the load.
  • Repairable as we can remove the damaged CornerMax™ Sleeve and sew a new one to the sling.

    • Note: Steel coils should be packaged with a ‘center protection’.
CornerMax™ Sleeve
Item No.		 External Sleeve width inch Attached over both legs of Twin-Path Sling
WP-CMS-06 6 Up to TPXC 5,000 (Cap. 50,000 lbs)