Sliding Wear Tube to protect Twin-Path® and Uni-Path® slings. Made from double layer Pro-Tech™ Ballistic material which is sewn into a tube. Holding straps to prevent sliding during service are optional and custom added.
State exact sling type for which is Wear Tube is for.
WP-BT-xxx

Standard Pro-Tech™ Ballistic plain Tube Protector

The optional Holding Strap prevents the Tube Holding Straps and Velcro Tape Protector from sling down the sling when in use. The strap wraps around the sling body and is then fastened back to the Tube with Velcro Hook-and- Loop tape.
WP-BT-xxx-S

Ballistic Tube Protector with Holding Straps and Velcro Tape.

Protec Ballistic™ Sliding Wear Tube

TWIN-PATH® & Uni-PATH®
Inside Tube Width inch Twin-Path® Xtra To fit over both sling bodies. Sling Type TPXC & TPXCE
WLL lbs		 SINGLE-PATH SPXCF To fit over both sling bodies. Sling Type TPC & TPCE
WLL lbs		 Uni-Path® To fit over both sling bodies. Sling Type UPD & UPD-L
WLL lbs		 Item No.
Plain		 Item No.
with Straps & Velco
4 20,000 6,000 – 9,000 2,600 – 6,000 WP-BT-040 WP-BT-040-S
6 25,000 – 40,000 12,000 – 17,000 9,000 – 17,000 WP-BT-060 WP-BT-060-S
7 50,000 – 60,000 22,000 – 40,000 23,000 – 32,000 WP-BT-070 WP-BT-070-S
8 70,000 – 100,000 50,000 – 60,000 40,000 – 50,000 WP-BT-080 WP-BT-080-S
10 125,000 – 150,000 70,000 – 85,000 60,000 – 70,000 WP-BT-100 WP-BT-100-S
12 175,000 – 200,000 100,000 80,000 – 100,000 WP-BT-120 WP-BT-120-S
16 250,000 – 275,000 — — WP-BT-160 WP-BT-160-S