UNI-Path® Polyester Round Slings

Bridle Slings with colour coded covers with Web-Connectors

DF 5:1

UR Legacy Capacities
Made with RIGGER’S CHOICE® Master Links

The minimum end-fitting capacity must be equal or higher than the VERTICAL (90°) single leg Vertical Capacity 90°. See table below.

The variety of end fitting choices is astronomical, so please select Rigger’s Choice®, Unirope®, Crosby, or any other Hardware as end fittings.
When selecting hardware remember that a DF 5:1 is required, means any ALLOY Lifting Chain hardware’s Capacity has to be converted from 4:1 to 5:1.

Note that 1- and 2 leg slings are made with Master Links, and 3- and 4-leg slings are made with Master Link Sub-Assemblies. Other links (Crosby, CM, Gunnebo, etc.) are available upon request

All slings are connected to Master links or Sub-Links with Rigger’s Choice Web/Roundsling Connector Code No. C8-WRC-xxx-RC

Rigger’s Choice
Web/Roundsling Connector

CROSBY Hardware

These fittings are easily attached and detached with either threaded bolts or by bolt-and-nut method. No special tools required.

RIGGER’S CHOICE Hardware

These fittings are attached the same as Alloy chain fittings. Tools are required to connect and disconnect the fittings. This is regarded as a more permanent connection.

UNI-Path® 2-leg Bridle Slings UR-Legacy Capacities
Polyester Core Yarns DF 5:1
  Bridle WLL to the Horizontal Angle  
      WLL lbs. 60° WLL lbs. 45° WLL lbs. 30° Nom. Top Link Type C-10 diameter inch Min. Sling Length w/o hardware
UPD 300-C1 1-leg 3,000* 1/2 3
UPD 400-C1 1-leg 4,000* 1/2 3
UPD 600-C1 1-leg 6,000* 3/4 3
UPD 900-C1 1-leg 9,000* 7/8 3
UPD 1200-C1 1-leg 12,000* 7/8 4
UPD 1400-C1 1-leg 14,000* 1 4
UPD 1700-C1 1-leg 17,000* 1 4
UPD 2300-C1 1-leg 23,000* 1-1/4 6
UPD 2600-C1 1-leg 26,000* 1-1/4 6
UPD 3200-C1 1-leg 32,000* 1/2 6
UPD 4000-C1 1-leg 40,000* 1/2 6
UPD 5000-C1 1-leg 50,000* 1-3/4 6
UPD 300-C2 2-leg 5,190 4,240 3,000 1/2 3
UPD 400-C2 2-leg 6,930 5,660 4,000 3/4 3
UPD 600-C2 2-leg 10,390 8,485 6,000 7/8 3
UPD 900-C2 2-leg 14,000 11,430 7,000 1 3
UPD 1200-C2 2-leg 20,780 16,970 12,000 1 4
UPD 1400-C2 2-leg 24,250 19,800 14,000 1-1/4 4
UPD 1700-C2 2-leg 29,450 24,050 17,000 1-1/4 4
UPD 2300-C2 2-leg 39,837 32,526 23,000 1-1/2 6
UPD 2600-C2 2-leg 45,000 36,770 26,000 1-1/2 6
UPD 3200-C2 2-leg 55,400 45,250 32,000 1-3/4 6
UPD 4000-C2 2-leg 69,300 56,570 40,000 1-3/4 6
UPD 5000-C2 2-leg 86,600 70,700 50,000 2 6
UPD 300-C3 3-leg 7,280 5,944 4,200 3/4 3
UPD 400-C3 3-leg 10,390 8,484 6,000 3/4 3
UPD 600-C3 3-leg 15,170 12,386 8,760 7/8 3
UPD 900-C3 3-leg 23,380 19,090

13,500

1 3
UPD 1200-C3 3-leg 31,180 25,500 18,000 1-1/4 4
UPD 1400-C3 3-leg 36,370 29,700 21,000 1-1/4 4
UPD 1700-C3 3-leg 44,170 36,060 25,500 1-1/2 4
UPD 2300-C3 3-leg 59,750 48,790 34,500 1-1/2 6
UPD 2600-C3 3-leg 67,550 55,150 39,000 1-3/4 6
UPD 3200-C3 3-leg 83,140 67,900 48,000 1-3/4 6
UPD 4000-C3 3-leg 103,920 84,850 60,000 2-1/2 6
UPD 5000-C3 3-leg 129,600 105,800 74,800 2-1/2 6
UPD 300-C4 4-leg 10,390 8,480 6,000 3/4 3
UPD 400-C4 4-leg 13,856 11,310 8,000 7/8 3
UPD 600-C4 4-leg 20,780 16,970 12,000 1 3
UPD 900-C4 4-leg 31,180 25,450 18,000 1-1/4 3
UPD 1200-C4 4-leg 40,560 33,120 23,420 1-1/2 4
UPD 1400-C4 4-leg 48.500 39,600 28,000 1-1/2 4
UPD 1700-C4 4-leg 58,900 48,000 34,000 1-1/2 4
UPD 2300-C4 4-leg 79,700 65,000 46,000 1-3/4 6
UPD 2600-C4 4-leg 90,000 73,530 52,000 2 6
UPD 3200-C4 4-leg 105,600 86,220 60,970 2-1/2 6
UPD 4000-C4 4-leg 138,560 113,130 80,000 2-1/2 6
UPD 5000-C4 4-leg 173,200 141,400 100,000 2-3/4 6
* Vertical Capacity 90°