NYLON

Synthetic Bridle Slings

Slings are mechanically connected to the hardware

DF 5:1

Made with RIGGER’S CHOICE® Links

The minimum end-fitting capacity must be equal or higher than the VERTICAL (90°) single leg capacity.

The variety of end fitting choices is astronomical, so please select Rigger’s Choice®, Unirope®, Crosby, or any other Hardware as end fittings.

When selecting hardware remember that a DF 5:1 is required, means any ALLOY Lifting Chain hardware’s Capacity has to be converted from 4:1 to 5:1.

Note that 1- and 2 leg slings are made with Rigger’s Choice® Master Links, and 3- and 4-leg slings are made with Rigger’s Choice® Master Link Sub-Assemblies, Other links (Crosby, CM, Gunnebo, etc.) are available upon request.

All slings are connected to Master links or Sub-Links with Rigger’s Choice Web/Roundsling Connector Code No. C8-WRC-xxx-RC.

Rigger’s Choice
Web/Roundsling Connector

CROSBY Hardware

These fittings are easily attached and detached with either threaded bolts or by bolt-and-nut method. No special tools required.

RIGGER’S CHOICE Hardware

These fittings are attached the same as Alloy chain fittings. Tools are required to connect and disconnect the fittings. This is regarded as a more permanent connection.

Uni-Web® Bridle Slings mechanically connected
  Bridle WLL to the Horizontal Angle  
  Stock Code Web width inch   WLL lbs. 60° WLL lbs. 45° WLL lbs. 30° Nom. Top Link Type C-10 diameter inch
EE1-901-N-D1 1 1-ply 1-leg 1,600* 1/2 C-10 ML
EE1-902-N-D1 2 1-ply 1-leg 3,100* 1/2 C-10 ML
EE1-903-N-D1 3 1-ply 1-leg 4,700* 1/2 C-10 ML
EE2-901-N-D1 1 2-ply 1-leg 3,100* 1/2 C-10 ML
EE2-902-N-D1 2 2-ply 1-leg 6,200* 3/4 C-10 ML
EE2-903-N-D1 3 2-ply 1-leg 8,800* 7/8 C-10 ML
EE4-901-N-D1 1 4-ply 1-leg 5,500* 3/4 C-10 ML
EE4-902-N-D1 2 4-ply 1-leg 11,000* 7/8 C-10 ML
EE4-903-N-D1 3 4-ply 1-leg 16,400* 1 C-10 ML
EE1-901-N-D2 1 1-ply 2-leg 2,771 2,263 1,600 1/2 C-10 ML
EE1-902-N-D2 2 1-ply 2-leg 5,369 4,384 3,100 3/4 C-10 ML
EE1-903-N-D2 3 1-ply 2-leg 8,140 6,647 4,700 7/8 C-10 ML
EE2-901-N-D2 1 2-ply 2-leg 5,369 4,384 3,100 3/4 C-10 ML
EE2-902-N-D2 2 2-ply 2-leg 10,738 8,768 6,200 7/8 C-10 ML
EE2-903-N-D2 3 2-ply 2-leg 15,242 12,445 8,800 1 C-10 ML
EE4-901-N-D2 1 4-ply 2-leg 9,526 7,778 5,500 7/8 C-10 ML
EE4-902-N-D2 2 4-ply 2-leg 19,052 15,556 11,000 1 C-10 ML
EE4-903-N-D2 3 4-ply 2-leg 28,405 23,193 16,400 1-1/4 C-10 ML
EE1-901-N-D3 1 1-ply 3-leg 4,157 3,394 2,400 3/4 C-10 MSA
EE1-902-N-D3 2 1-ply 3-leg 8,054 6,576 4,650 3/4 C-10 MSA
EE1-903-N-D3 3 1-ply 3-leg 12,211 9,970 7,050 3/4 C-10 MSA
EE2-901-N-D3 1 2-ply 3-leg 8,054 6,576 4,650 3/4 C-10 MSA
EE2-902-N-D3 2 2-ply 3-leg 16,108 13,152 9,300 1 C-10 MSA
EE2-903-N-D3 3 2-ply 3-leg 22,862 18,667 13,200 1 C-10 MSA
EE4-901-N-D3 1 4-ply 3-leg 14,289 11,667 8,250 7/8 C-10 MSA
EE4-902-N-D3 2 4-ply 3-leg 28,578 23,334 16,500 1-1/4 C-10 MSA
EE4-903-N-D3 3 4-ply 3-leg 42,607 34,789 24,600 1-1/2 C-10 MSA
EE1-901-N-D4 1 1-ply 4-leg 5,542 4,525 3,200 3/4 C-10 MSA
EE1-902-N-D4 2 1-ply 4-leg 10,738 8,768 6,200 3/4 C-10 MSA
EE1-903-N-D4 3 1-ply 4-leg 16,281 13,293 9,400 1 C-10 MSA
EE2-901-N-D4 1 2-ply 4-leg 10,738 8,768 6,200 3/4 C-10 MSA
EE2-902-N-D4 2 2-ply 4-leg 21,477 17,536 12,400 1 C-10 MSA
EE2-903-N-D4 3 2-ply 4-leg 30,483 24,890 17,600 1-1/4 C-10 MSA
EE4-901-N-D4 1 4-ply 4-leg 19,052 15,556 11,000 1 C-10 MSA
EE4-902-N-D4 2 4-ply 4-leg 38,104 31,112 22,000 1-1/4 C-10 MSA
EE4-903-N-D4 3 4-ply 4-leg 56,810 46,386 32,800 1-1/2 C-10 MSA
* Vertical Capacity 90°