POLYESTER

Synthetic Bridle Slings

Sewn into the hardware

DF 5:1

Made with RIGGER’S CHOICE® Rings and Links

The minimum end-fitting capacity must be equal or higher than the VERTICAL (90°) single leg capacity.

The variety of end fitting choices is astronomical, so please select Rigger’s Choice®, Unirope®, Crosby, or any other Hardware as end fittings.
When selecting hardware remember that a DF 5:1 is required, means any ALLOY Lifting Chain hardware’s Capacity has to be converted from 4:1 to 5:1.

Note that 1- and 2 leg slings are made with Rigger’s Choice® Master Links, and 3- and 4-leg slings are made with Rigger’s Choice® Master Link Sub-
Assemblies. Other links (Crosby, CM, Gunnebo, etc.) are available upon request

All eyes are protected with CoverMax®.

Uni-Web® Bridle Slings Sewn into the Hardware
  Bridle WLL to the Horizontal Angle  
  Stock Code Web width inch   WLL lbs. 60° WLL lbs. 45° WLL lbs. 30° Nom. Top Link
Type: see below
diameter inch
EE1-901-P-E1 1 1-leg 1,600* 1/2 C-10
EE1-902-P-E1 2 1-leg 3,100* 1/2 C-10
EE1-903-P-E1 3 1-leg 4,700* 1/2 C-10
EE2-901-P-E1 1 1-leg 3,100* 1/2 C-10
EE2-902-P-E1 2 1-leg 6,200* 3/4 C-10
EE2-903-P-E1 3 1-leg 8,800* 7/8 C-10
EE4-901-P-E1 1 1-leg 5,500* 3/4 C-10
EE4-902-P-E1 2 1-leg 11,000* 7/8 C-10
EE4-903-P-E1 3 1-leg 16,400* 1 C-10
EE1-901-P-E2 1 2-leg 2,771 2,263 1,600 1/2 C-10
EE1-902-P-E2 2 2-leg 5,369 4,384 3,100 3/4 C-10
EE1-903-P-E2 3 2-leg 8,140 6,647 4,700 7/8 C-10
EE2-901-P-E2 1 2-leg 5,369 4,384 3,100 3/4 C-10
EE2-902-P-E2 2 2-leg 10,738 8,768 6,200 7/8 C-10
EE2-903-P-E2 3 2-leg 15,242 12,445 8,800 1 C-10
EE4-901-P-E2 1 2-leg 9,526 7,778 5,500 7/8 C-10
EE4-902-P-E2 2 2-leg 19,052 15,556 11,000 1 C-10
EE4-903-P-E2 3 2-leg 28,405 23,193 16,400 1-1/4 C-10
EE1-901-P-E3 1 3-leg 4,157 3,394 2,400 3/4 LR-MSA
EE1-902-P-E3 2 3-leg 8,054 6,576 4,650 3/4 LR-MSA
EE1-903-P-E3 3 3-leg 12,211 9,970 7,050 7/8 LR-MSA
EE2-901-P-E3 1 3-leg 8,054 6,576 4,650 3/4 LR-MSA
EE2-902-P-E3 2 3-leg 16,108 13,152 9,300 7/8 LR-MSA
EE2-903-P-E3 3 3-leg 22,862 18,667 13,200 1-1/8 LR-MSA
EE4-901-P-E3 1 3-leg 14,289 11,667 8,250 7/8 LR-MSA
EE4-902-P-E3 2 3-leg 28,578 23,334 16,500 1-1/4 LR-MSA
EE4-903-P-E3 3 3-leg 42,607 34,789 24,600 1-3/4 LR-MSA
EE1-901-P-E4 1 4-leg 5,542 4,525 3,200 3/4 LR-MSA
EE1-902-P-E4 2 4-leg 10,738 8,768 6,200 7/8 LR-MSA
EE1-903-P-E4 3 4-leg 16,281 13,293 9,400 7/8 LR-MSA
EE2-901-P-E4 1 4-leg 10,738 8,768 6,200 7/8 LR-MSA
EE2-902-P-E4 2 4-leg 21,477 17,536 12,400 1-1/8 LR-MSA
EE2-903-P-E4 3 4-leg 30,483 24,890 17,600 1-1/4 LR-MSA
EE4-901-P-E4 1 4-leg 19,052 15,556 11,000 1-1/8 LR-MSA
EE4-902-P-E4 2 4-leg 37,400 30,587 21,590 1-1/4 LR-MSA
EE4-903-P-E4 3 4-leg 56,810 46,386 32,800 1-3/4 LR-MSA
* Vertical Capacity 90°